Zeal Manufacturing And Calibration Services Private Limited
Zeal Manufacturing And Calibration Services Private Limited
Shivane, Pune, Maharashtra
GST No. 27AABCZ1146N1Z0
TrustSEAL Verified
Call 0804898456584% Response Rate
SEND EMAIL

Testing Equipment

Prominent & Leading Manufacturer from Pune, we offer ground and earth continuity tester, three phase secondary injection test kit, variable voltage variable frequency source, ground continuity tester, dc electronic load and ac resistive load bank.

Ground and Earth Continuity Tester

Ground and Earth Continuity Tester
  • Ground and Earth Continuity Tester
  • Ground and Earth Continuity Tester
  • Ground and Earth Continuity Tester
  • Ground and Earth Continuity Tester
  • Ground and Earth Continuity Tester
  • Ground and Earth Continuity Tester
Get Best Quote
Approx. Price: Rs 65,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Frequency50 Hz
BrandZeal
UsageIndustrial
MaterialMild Steel
Phases1
DimensionsW 480 mm D 350 mm H 250 mm

Technical Specification:

  • (All Specifications Are Valid After Warm Up Of 30 Minutes)
  • Make:Zeal
  • Model: ZMGCT
  • Power: 230V Ac, ± 10 % , 50 Hz
  • Resistance Measurement Range: 0 To 200 Milli Ohm: Test Current: 30 A ± 1% Ac
  • Open Circuit Voltage: 8V AC: Current Waveform: Sinusoidal
  • Acceptable Setting: By Press to Set Switch & Potentiometer
  • Programmable Timer: 1 To 60 Sec
  • Metering: 3 ½ Digit Digital V , A And Milli Ohm Meter
  • Indication Accuracy: V: 1.5% of Reading, A: 1.5% of Reading, mΩ: 1.5% Of Reading± 5Dgt
  • Accuracy Of Trip Resistance: ± 5 mΩ
  • Indications: Trip, Test On, Test Off
  • Output Test Current Through High Current Wire And Earth Pin Of 3 Pin Socket.
  • Accessory: High Current Crocodile Wire / Test Probe
  • Method Of Measurement: Passing A Constant Ac Current (30A) And Measuring A Voltage Drop Across The Resistance To Be Measured.
Request
Callback
Yes! I am interested

Three Phase Secondary Injection test Kit

Three Phase Secondary Injection test Kit
  • Three Phase Secondary Injection test Kit
  • Three Phase Secondary Injection test Kit
  • Three Phase Secondary Injection test Kit
  • Three Phase Secondary Injection test Kit
  • Three Phase Secondary Injection test Kit
Get Best Quote
Approx. Price: Rs 3.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Mode3 Phase, 4 Wire
PF Range0.5 to Unity
Frequency45 to 60 Hz
Sinusoidal OutputsTHD 1.5%
Output portsVr ,Vy, Vb - N, Ir (Hi, Lo),Iy (Hi, Lo),Ib (Hi, Lo)
Compliance20 VA, at FS on V ranges, Compliance: 150 VA, at FS on A channels
SettingBy coarse and fine set of potentiometer for Voltage and Current By push button keys.
MeteringDigital AC Voltmeter, Digital AC Ammeter, Universal meter to indicate PF, W, VA, Var of each phase.
AccuracyClass 0.15% (for V, A, W and Whr )
ProtectionsOverload and Short circuit.
Input220 Volt AC,50Hz
Output Voltage Range0 to 300 V (L-N) or 0 to 520 Phase to Phase
Output Current Range0 to 50 A per phase
Country of OriginMade in India

Make: ZEAL , Model: ZM3ΦSIK50,
Output Voltage Range: 0 to 300 V (L-N) or 0 to 520 Phase to Phase
Output Current Range: 0 to 6 A per phase

 

Request
Callback
Yes! I am interested

Variable Voltage Variable Frequency Source

Variable Voltage Variable Frequency Source
  • Variable Voltage Variable Frequency Source
  • Variable Voltage Variable Frequency Source
  • Variable Voltage Variable Frequency Source
  • Variable Voltage Variable Frequency Source
  • Variable Voltage Variable Frequency Source
Get Best Quote
Approx. Price: Rs 2.4 Lakh / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandZeal
DisplayDigital
PhaseSingle Phase
Current4A
ConditionNew
UsageIndustrial
Output Voltage Range0 to 250.0 V AC

Variable voltag variable frequency source is used to simulate mains conditions of different countries. Also it is used for verifying frequency response of power devices, frequency relays and components. Variable current variable frequency source are used for checking current transformers.

Technical Specification:
Make: ZEAL
Input: 230 Volt ±10% AC, 50 Hz
Output Voltage Range: 0 to 250.0 V AC
Current: 4A
Compliance: 1000 VA, at FS
Output Frequency Range: 45 to 60 Hz
Setting of voltage & Frequency: By Multi turn potentiometers
Meters: 3½ digit AC voltmeter, 3 digit frequency meters
Harmonic Distortion: < 4%
Accuracy of V: 0.15% ± 10 digit
Accuracy of Hz: ± 2 digit
Load & Line Regulation: better than 0.5%
Protection: Against Overload & Short circuit.
Request
Callback
Yes! I am interested

Ground Continuity Tester

Ground Continuity Tester
  • Ground Continuity Tester
  • Ground Continuity Tester
  • Ground Continuity Tester
  • Ground Continuity Tester
  • Ground Continuity Tester
  • Ground Continuity Tester
Get Best Quote
Approx. Price: Rs 65,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2 Piece
UsageIndustrial
Humidity Range0 - 50 % RH
Frequency50 Hz
MaterialMild Steel
Phases1
DimensionsW 480 mm D 350 mm H 250 mm

Being a perfect instrument, our Ground Continuity Tester works on the principle of test current related to sinusoidal waveform. Across the ground path, this tester measures both current and voltage, thus is widely appreciated among our clients. This is available in different specifications to our clients in cost effective prices.

Technical Specifications :

  • Make : ZEAL
  • Model : ZMGCT
  • Power : 230VAC, ± 10%, 50 Hz
  • Resistance Measurement Range: 0 to 200 miLli Ohm
  • Test Current : 30A± 1¬
  • Open Circuit Voltage : 8V,AC
  • Current Waveform : Sinusoidal
  • Acceptable setting : by press to set switch and potentiometer, using digital milli Ohm meter
  • Programmable Timer : 1 to 60 sec
  • Metering : 3 Yi digit Digital V, Aand milli Ohm meter
  • Indication Accuracy : V: 1.5% of reading, A : 1.5% of reading, mO : 1.5% of reading± 5dgt
  • Accuracy of trip resistance : ± 5 m Q
  • Indications : Trip, Test On, Test Off
  • Output test current through high current wire and Earth pin of 3 pin socket
  • Accessory : High Current Crocodile wire/Test Probe
  • Method of measurement : Passing a constant AC current (30A) and measuring a voltage drop across the resistance to be measured
Request
Callback


Additional Information:

  • Port of Dispatch: Mumbai JNPT
  • Delivery Time: As per Buyers Requirement
  • Packaging Details: Export Worthy Packing
Yes! I am interested

DC Electronic Load

DC Electronic Load
  • DC Electronic Load
  • DC Electronic Load
Get Best Quote
Approx. Price: Rs 35,000 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity5 Piece
ModelZMEL
UsageIndustrial, Laboratory
Voltage220 V
Phase1
Surface TreatmentPowder coated
Load Range0 - 20 A

Electronic Loads of higher ratings can also be designed to suit customer requirement

Specifications:
  • Make: ZEAL
  • Model: ZMEL
  • Typical Load Range: 0 - 20 A (settable by multi turn potentiometer)*
  • Load Current Regulation: +/- 0.05 % (for a change of battery voltage form No load voltage to end voltage level)
  • Line Regulation: +/- 0.05 % (for +/- 10% change in mains supply)
  • Power Requirement:230 V AC +/- 10% 50Hz
  • Metering: 3 Digit Volt. Amp meter with selector switch indicates battery voltage and current or separate Volt and Ammeter.
  • Programmable Timer: 0 to 999 sec.

Other Information:

ParameterRangeResolutionAccuracy
DC Volt15 V0.01 V0.5% rdg +/- 2 digits
DC Current20 A0.01 A0.5% rdg +/- 2 digits
Request
Callback
Yes! I am interested

Dc Electronic Load

Dc Electronic Load
  • Dc Electronic Load
Get Best Quote
Approx. Price: Rs 40,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity5 Piece
Typical Load Range0 - 20 A (settable by multi turn potentiometer)
Power Requirement230 V AC +/- 10 %
Programmable Timer0 to 999 Sec
BrandZeal
UsageIndustrial
Model Name/NumberZMEL400
Power230V
Capacity400WATT
ApplicationsLOAD BANK
Load Control AccuracyAs per description
Dimension(450 W X 300 D X 250 H) mm
Weight15kg approx

Electronic Load

Input: 230V, 50Hz single phase

Make: ZEAL   Model: ZMEL400

Range of load: 0 to 20 A

DC Voltage range: 3 to 20 V DC

Maximum Power: 400 W max

Load Control accuracy: ± 0.1 % for change in voltage from 3V to 20 V

Load adjustment by set of coarse and fine control multi turn potentiometer or by analog voltage level 0 to 10V DC

With 3½ Digital DC volt meter and DC Ammeter
Request
Callback
Yes! I am interested

AC Resistive Load Bank

AC Resistive Load Bank
  • AC Resistive Load Bank
Get Best Quote
Approx. Price: Rs 1.6 Lakh / PieceGet Latest Price

Product Details:

TypeResistive Load Bank
Shapesquare
Materialcustomized
PowerDC
Country of OriginMade in India

We maintain a strict Quality Management Policy, which is religiously practiced within the organization as per ISO9001:2015. Apart from manufacturing our range of flawless test & measurement equipment, we are equally inclined towards the timely deliveries. We have a team of trained & experienced humans in all the processes. We treat our suppliers& service providers as business partners. We offer quality service to our customers during & after warranty also!

Get Best Price Of The AC Resistive Load Bank For Rs.160000/-
Request
Callback
Yes! I am interested

IGBT Tester

IGBT Tester
  • IGBT Tester
Get Best Quote
Approx. Price: Rs 2 Lakh / PieceGet Latest Price

Product Details:

Model Name/NumberZMIGBTT
BrandZeal
Range0 to 999 seconds
IndicationsTrip, HV On, HV Off.
Resolution0.01kV, 1mA respectively
Metering3 1/2 digit Digital kV meter

Designed with better features and accu, our offered range of IGBT Tester is meant for performing IGBT Test. Thus, this is fabricated to be used in measuring voltage of transformer, electronic instruments, motors, components and control panel.

Technical Specifications

3 Phase Digital Variac
MakeZeal
ModelZMIGBTT
DC High Current section1) To check VCE Saturation at rated current.
Current: 0 to 400A
Compliance: 3V
2) To check Diode forward voltage drop at rated current.
Indications:
Ammeter:
 to indicate set current
Voltmeter: to measure diode forward drop or VCE saturation.
DC High Voltage Section1) To check Vce Max 2000 V, 50 m A.
Indications: Ammeter: to indicate set current
kV meter: to measure voltage.
Dual Power Supply SectionVoltage: 0 to +/- 20V for applying to Gate of IGBT
Current: 20 m A.
Meters: Separate 3 Digit Volt Meter & Ammeter for both channels
Accuracy: 0.5% for vtg +/-2 digits
0.5% for current +/-2 digits
AC High voltage Section1) To check Isolation voltage 2500 V, 20 m A.
Metering: 3 1/2 digit Digital kV meter, mA meter
Accuracy: kV: 1.5 % of FS.+/- 2 digit,
mA: 1.5%+/- 2 digit
Resolution: 0.01kV, 1mA respectively
Programmable Timer:
Range:
 0 to 999 seconds
Indications: Trip, HV On, HV Off.

Request
Callback
Yes! I am interested

High Frequency Stunner

High Frequency Stunner
  • High Frequency Stunner
  • High Frequency Stunner
  • High Frequency Stunner
  • High Frequency Stunner
  • High Frequency Stunner
  • High Frequency Stunner
Get Best Quote
Approx. Price: Rs 1.5 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Voltage230 Volt +/-10% AC, 50 Hz
Weight85 kg Approx
Dimensions(W:650 X D:430 X H:450) mm
BrandZEAL
Output Voltage Range5 to 200 V (Sine wave)
Max Current5 Amps (with overload protection)
Output Frequency Range50 to 2000 Hz

Stunning (electric shock treatment) is done in plants before cutting the chickens to avoid the pains. Particularly in Halal method of cutting; the blood of the bird is allowed to drain through partly cut neck when the bird is alive. Stunning with specific electric conditions ensures birds to become unconscious in few milliseconds.Thereby while ensuring Halal tradition, machine reduces pains to zero.


SPECIFICATIONS:
High Frequency Stunner 

 

Make: ZEAL

 

Input: 230 Volt ±10% AC, 50 Hz

 

Output Voltage Range:  5 to 200 V (Sine wave)

 

Max Current: 5 Amps (with overload protection)

 

Compliance: 1000 VA, at FS of each range

 

Output Frequency Range:  50 to 2000 Hz.

 

Meters:

 

4-digit AC voltmeter,

 

4-digit frequency meter

 

4-digit AC Current meter with 2 ranges (range1: 2A, range2: 5A)

 

Accuracy of V: 1.5% ± 10digit, Resolution: 0.1 V

 

Accuracy of Hz:  ± 2digit, Resolution: 0.1 Hz

 

Accuracy of A: 1 % ±3, digit,

 

Protection: Against Overload & Short circuit with trip indication by LED

 

Controls:

 

-Range selection by toggle switch on panel

 

-Power ON/OFF by toggle switch on panel

 

Setting of Voltage & Frequency and Current: By Multi turn potentiometers

 

-Dimensions :    (W:650  X  D:430  X  H:450) mm

 

-Weight         : 85 kg Approx.

Request
Callback
Yes! I am interested
X

Explore More Products

View All Products




Reach Us
Vikas Rathod (Director)
Zeal Manufacturing And Calibration Services Private Limited
S. No, 78/1 Pandhari Industrial Estate, Shivane
Pune - 411023, Maharashtra, India


Call Us


Send E-mail