Power Sources,Voltage Source,Regulated Power Sources,Variable Voltage Source

Power Sources

The power sources manufactured by us are known for their reliability. They are very easy to operate and install. Our entire range of power sources are stringently checked by our quality assistants to ensure their high quality standards. Additionally, we customize these as per the requirement of our clients.

Salient features:

Good regulation against load & line variation
High efficiency
Short Circuit and Overload Protection
Application specific design
Reliable Performace
Operating in different climatic conditions

DC Regulated Power Supply

Our DC regulated power supply are widely used in various industries and Educational Institutes. The output voltage produced by our DC power supply ranges from 0 to 1000 V and output current ranges from 0 to 100 Amp. Our power supply is provided with Digital Panel Meters for voltage and current . Additionally, equiped with power supply overload and short circuit protection. The input power required by our power supply is 230 V or 110 V ±10%, and 50/60 Hz with operating temperatures 0 to 50^o C. Moreover, we can customize these as per the specification provided by our clients.

Technical Specifications:

Output Voltage Range	0 to 1000 V
Output Current	0 to 100 amp.
Output Maximum Wattage	5000 Watt
Load Regulation Typical	0.05 % ( From No Load to Full Load)
Line Regulation Typical	0.05 %
Ripple	Better than 0.1% Vrms Max. (With / Without Load)
Output Stability	0.1 % ( After Warm up of 20 minutes)
Digital Meter	( Separate Meter For DC Voltage and current)
Accuracy	For Voltage : 0.5 % ±1 dgt
	For Current : 0.5 % ±1 dgt
Protection	Overload and Short circuit
Operating Temperature	0 to 50^oC
Input Power Requirement	230 V or 110 V ±10% , 50/60 Hz

Features:

Above 100 W power supplies have pre regulator
Switching frequency above 100 KHz for SMPS

Add to Enquiry Basket

Variable Voltage/Current Source With Variable Frequency

Variable voltage/current & variable frequency source is used to simulate mains conditions of different countries. Also it is used for verifying frequency response of power devices, frequency relays and components. Variable current variable frequency source are used for checking current transformers.

Technical Specifications:

Output Voltage Range : Single Phase or 3 Phase	0 to 440 V (for Voltage Source )
Output Current Source	0 to 100 A (for Current Source)
Output Maximum Power	12 kVA
Frequency Range	40 to 1000 Hz
Total Harmonic Distortion	Less than 1.25% for Precision Voltage and Current Source. 3.5% for Power sources
Stability	0.1% (After Warm-up)
Output Power	Up to 500 VA or as per customer requirement
Digital Meters	3½ digit Voltage/Current, 4 digit Frequency
Protection	Overload and short circuit
Operating Temperature	25±10ºC
Line / Load Regulation	0.5 % for (230 ±10 %)

Add to Enquiry Basket

Battery Charger

We manufacture battery chargers or cell boosters. Our battery chargers are known for its efficiency that is greater than 90% and ripple resistance that is less than 150mV. We also manufacture cell boosters with linear power supply technology (Specifications voltages up to 150 V, current up to 150A).

Technical Specifications:

Specifications for Typical Battery	12 V, 100 AH
Charger Operating Voltage	125 to 300 V AC. 50 to 400 Hz
Ripple	<150mV
Efficiency	>90%
Maximum Charging Current	13 A
Indication of Low battery	For voltage less than 10.5 V
Indication of Battery Charged	For voltage above 13.5V
Protection	Overload, Short circuit, Reverse polarity.
Working Principle	SMPS

Add to Enquiry Basket

Digital Variac

The digital variac offered by us has a digital meter for voltage and current. It has output voltage of 270 V AC and accuracy of 0.75%. Further, the current ranges from 2.0 Amp AC and 10.0 Amp AC. It is very good equipment for testing line regulation of power supplies, transformers etc.

Technical Specifications:

Digital Meter : (With Select Switch) For Voltage and Current
Output Voltage	Range : 270 V AC
	Accuracy : 0.75 %
Current	Range: 2.0 Amps AC, 10. Amps. AC
	Accuracy : 0.75 %
Dimensions:
	(130 x 240 x 160) mm For 2 Amps.
	(180 x 300 x 160) mm For 5 Amps.

Add to Enquiry Basket

Cell Booster

The Cell Boosters manufactured by us are known for their reliability. The are very easy to operate and install. Our entire range is stringently checked by our quality assistants to ensure high quality standards. Additionally, we customize these as per the requirement of our clients.

Add to Enquiry Basket